Skip to content

Simpsonville · Mauldin · Five Forks · Fountain Inn

Licensed and insured in NC and SC · Consultations at (864) 351-7045

(864) 351-7045
Kneeling installer taps a wide wood-look floor plank with a white rubber mallet in an empty room with white baseboards and a window

ServicesFlooring Installation

Flooring Installation in Simpsonville

We install hardwood, engineered wood, luxury vinyl plank and tile in new builds and existing homes. Before any plank goes down, we check the subfloor and give you a written schedule. If a date has to move, you hear it from us first, with the reason.

New floors, done in the right order

A floor is only as good as what sits under it. Most of the problems people call us about, like squeaks, gaps, cracked tile and cupped boards, started with a subfloor or moisture issue nobody checked. So that is where our flooring installation starts.

We handle flooring as part of a custom home build, inside a larger home remodel, or as a job by itself. Either way you get a plan that says which rooms we work in, on which days, and when you can walk on the new floor again. Furniture has to move and rooms go out of use, so that plan matters as much as the material.

What the job includes

Subfloor check and repair

We look for soft spots, loose sheathing and high or low areas. We screw down what squeaks and flatten what is out of tolerance before any finish floor goes in.

Moisture readings

We take readings on the subfloor and the new material. Wood needs time to settle into your home's humidity, and in humid Upstate summers that step keeps boards from cupping later.

Tear-out and haul-away

If old carpet, vinyl or tile is coming up, we remove it and take it with us.

Installation by material

Nail-down or glue-down hardwood, floating or glued engineered wood, click-lock luxury vinyl plank, and tile set over the right backer or membrane. Each gets the underlayment and expansion gap the maker calls for.

Trim and transitions

We fit baseboard or shoe molding, thresholds and stair nosing so the new floor meets doors and other rooms cleanly.

Cleanup each day

We sweep up and clear our tools at the end of each day so the rooms you are still using stay usable.

Installer kneeling to lay oak-tone plank flooring in a living room, with the sofa and recliner pushed aside, a rolled-up carpet by the wall and tools on a drop cloth

Signs it is time for new floors

Boards that cup or gap
Edges rising or seams opening with the seasons usually point to moisture underneath. We find the source before laying anything new.
Soft or bouncy spots
A floor that gives when you step on it often means damaged or undersized subfloor. That gets fixed first.
Cracked tile or loose grout
Cracks that run across several tiles tend to come from movement in the floor below, not from the tile itself.
Worn finish you cannot refinish
Engineered wood with a thin wear layer and most vinyl cannot be sanded. Once they wear through, replacement is the real fix.
A remodel that changes the floor plan
Taking out a wall or joining two rooms leaves mismatched floors. One continuous floor ties the new space together.

How a flooring job runs

  1. 1

    Consultation by phone, then a walk-through

    We talk through the rooms, the material you like and your timing. Then we come measure, check the subfloor and take moisture readings.

  2. 2

    Written plan and schedule

    You get the scope, the material count and the dates. We tell you which rooms need to be cleared, and by when.

  3. 3

    Delivery and acclimation

    Wood flooring is delivered and left in the home to adjust, often for several days. We will not rush this step to save a date.

  4. 4

    Prep and install

    We tell you the arrival window for each workday. Subfloor fixes come first, then underlayment, then the floor, room by room.

  5. 5

    Trim and walk-through

    We set trim and transitions, clean up and walk the floor with you. You know when furniture can go back and when tile grout is ready for traffic.

What moves the price

Every floor is priced from what we measure and find on the walk-through. The material is only part of it. Prep and layout often make the bigger difference, and we spell both out in the estimate so nothing shows up later.

Material choice
Solid hardwood, engineered wood, luxury vinyl plank and tile vary widely in cost and in labor time. Tile and site-finished hardwood take the most hours.
Subfloor condition
A flat, dry subfloor keeps cost down. Rot, squeaks or uneven framing add repair work before install.
Tear-out
Removing glued carpet pad or old tile set in mortar takes far longer than pulling up a floating floor.
Layout and stairs
Diagonal or herringbone patterns, many small rooms and stair treads all add cutting and fitting time.

Flooring questions we hear most

How long will my rooms be out of use?
It depends on the material and the number of rooms. A few rooms of click-lock vinyl can be done in a short stretch, while hardwood needs acclimation days first and tile needs grout to cure. We give you room-by-room dates in writing before we start.
Can I stay in the house while you work?
Most people do. We work in sections so you keep a path through the house, and the kitchen or a bathroom stays usable when we can manage it. We tell you each day which rooms are off limits.
Which floor holds up best with kids and pets?
Luxury vinyl plank and tile shrug off water and scratches best. Hardwood looks warmer but will show dents and wear over time. We will give you a straight answer based on how you use each room.
Do you install flooring in the homes you build?
Yes. On a custom home build, flooring is scheduled after drywall and paint so the finish floor is protected. We also handle it as part of a home remodel or as a standalone job.
What credentials do you carry for this work?
We are licensed and insured in NC and SC. We do flooring throughout Simpsonville and nearby towns like Mauldin, Five Forks and Fountain Inn.
What happens if my install date changes?
Material delays and earlier phases of a project can push a date. When that happens we call you as soon as we know, explain why and give you the new date, so you are not left guessing.

Ready to plan your new floors

Tell us the rooms and the look you want. We will talk through materials, prep and a realistic schedule during a project consultation.